کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7969010 | 1514344 | 2018 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Interfacial diffusion reactions and mechanical properties of Ti3Al/Ni-based superalloy joints brazed with AgCuPd filler metal
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Dissimilar joining of a Ti3Al-based alloy to a Ni-based superalloy has been conducted using Ag-21Cu-25Pd filler metal. The joint microstructures were analyzed using SEM, EPMA, XRD and TEM. The reaction behaviors between different elements were discussed. Due to the strong affinity, element Pd mainly reacted with Ti3Al substrate and formed intermetallic compounds of TiPd, Ti3Pd5 and AlPd. Elements Ni and Ti reacted with each other and caused the formation of Ni3Ti in the centre of the joint. Owing to the diffusion effect, element Ag was enriched in the joint central area as (Ag,Cu)ss. With the prolonging of the brazing time varying from 3â¯min to 15â¯min at 1253â¯K, the tensile strength of the joint firstly increased and then decreased. The joints brazed at 1253â¯K for 10â¯min presented the maximum strength of 404â¯MPa at room temperature, and the joint strength of 212â¯MPa was maintained at 773â¯K. The total fracture surface covered the most of the reaction zones from the (Ag,Cu)ss to the diffusion effect zone at the Ti3Al side.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 144, October 2018, Pages 316-324
Journal: Materials Characterization - Volume 144, October 2018, Pages 316-324
نویسندگان
H.S. Ren, H.P. Xiong, W.M. Long, Y.X. Shen, S.J. Pang, B. Chen, Y.Y. Cheng,