کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7970225 | 1514381 | 2015 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Correlation between mechanical properties and retained austenite characteristics in a low-carbon medium manganese alloyed steel plate
ترجمه فارسی عنوان
همبستگی بین خواص مکانیکی و ویژگی های حفظ شده آستنیت در ورق فولادی آلیاژی منگنز با کربن کم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فولاد منگنز متوسط، میکروسکوپ الکترونی انتقال، ویژگی های مکانیکی، آستنیت باقیمانده،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
The effects of retained austenite characteristics on tensile properties and low-temperature impact toughness have been investigated by means of transmission electron microscopy and X-ray diffraction. It was found that only part of austenite phase formed during heat treating was left at room temperature. Moreover, the film-like retained austenite is displayed between bcc-martensite laths after heat treating at 600 °C, while the block-form retained austenite with thin hcp-martensite laths is observed after heat treating at 650 °C. It has been demonstrated that the film-like retained austenite possesses relatively high thermal and mechanical stability, and it can greatly improve low-temperature impact toughness, but its contribution to strain hardening capacity is limited. However, the block-form retained austenite can greatly enhance ultimate tensile strength and strain hardening capacity, but its contribution to low-temperature impact toughness is poor.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 106, August 2015, Pages 108-111
Journal: Materials Characterization - Volume 106, August 2015, Pages 108-111
نویسندگان
Jun Chen, Mengyang Lv, Shuai Tang, Zhenyu Liu, Guodong Wang,