کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7972057 | 1514615 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of annealing heat treatment on microstructural evolution and tensile behavior of Al0.5CoCrFeMnNi high-entropy alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this work, the mechanical characteristics and microstructural evolution of Al0.5CoCrFeMnNi high-entropy alloy (HEA) were studied after annealing at various temperatures (1000, 1100, and 1200â¯Â°C). X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy analyses were performed to reveal the phase and microstructural variations. The mechanical properties related to different microstructures of the alloy were characterized using tensile testing with digital image correlation. Annealing at lower temperatures led to a higher fraction of B2 phase and finer grain size of FCC (face-centered cubic) phase. A good combination of strength and ductility in this alloy was attributed to the ductile FCC matrix and hard secondary B2 phase. The alloy showed the active evolution of deformation twinning due to the low stacking fault energy when Al was added to CoCrFeMnNi to make the HEA. However, for alloy annealed at lower temperatures, twinning activity was suppressed by the smaller size of grains and depletion of Al content in the FCC matrix. The correlation between the microstructure and mechanical properties was also explored using a simple composite model.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 728, 13 June 2018, Pages 251-258
Journal: Materials Science and Engineering: A - Volume 728, 13 June 2018, Pages 251-258
نویسندگان
Jeong Min Park, Jongun Moon, Jae Wung Bae, Jaimyun Jung, Sunghak Lee, Hyoung Seop Kim,