کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7974370 | 1514632 | 2018 | 29 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and flow stress evolution during hot deformation of 304L austenitic stainless steel in variable thermomechanical conditions
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Most of industrial hot deformation processes are performed in variable conditions where the strain rate and/or deformation temperature are not constant. In this work, hot compression tests in both constant and varying strain rate conditions were performed on 304L austenitic stainless steel using a Gleeble 3800 machine. The variations in microstructure and flow stress during and after the transient deformation stage are carefully analysed. It is clearly shown that, following the abrupt increase of strain rate, both the flow stress and substructural changes are subjected to a transient period over strains of ~0.2, before reaching states similar to those developed through constant strain rate conditions at the new strain rate. When the strain rate was rapidly decreased, the flow stress transient stage extended over a lower strain interval than the substructure transient period. It is shown that local misorientation distributions are good indicators of the deformation microstructure of low SFE materials as they capture small variations in deformation structures which cannot be analysed from stress-strain curves alone.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 711, 10 January 2018, Pages 600-610
Journal: Materials Science and Engineering: A - Volume 711, 10 January 2018, Pages 600-610
نویسندگان
K. Huang, R.E. Logé,