کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7976365 | 1514693 | 2016 | 19 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Creep behavior of high-pressure die-cast Mg-4Al-4La-0.4Mn alloy under medium stresses and at intermediate temperatures
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Tensile creep behavior of the high-pressure die-cast Mg-4Al-4La-0.4Mn alloy under stresses of 50-100 MPa and at 150-225 °C was thoroughly investigated. This alloy exhibits a stress exponent of approximately 6 and the activation energy Q falls within the range of 80-120 kJ/mol at 150-200 °C. From fitting results, the commonly adopted threshold stress approach is not suitable for ALa44 alloy, and the normalized stress exponent is approximately 7, suggesting that creep deformation of ALa44 alloy was controlled by low-temperature dislocation climb (core diffusion). Furthermore, the microstructural analysis results indicate that the rate-controlling creep mechanism of ALa44 alloy is dislocation climb, but the cell boundary disintegration and the dislocation cross-slip also assisted deformation during creep processes.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 650, 5 January 2016, Pages 190-196
Journal: Materials Science and Engineering: A - Volume 650, 5 January 2016, Pages 190-196
نویسندگان
Qiang Yang, Tian Zheng, Deping Zhang, Fanqiang Bu, Xin Qiu, Xiaojuan Liu, Jian Meng,