کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7976382 | 1514693 | 2016 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Texture and anisotropy in selective laser melting of NiTi alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Selective laser melting (SLM) is used to manufacture dense NiTi parts. The microstructure and texture are assessed (before and after annealing followed by furnace cooling) and linked to the compression behaviour and shape memory response. It is shown that SLM strongly orients the fine austenite subgrains towards the building direction. This texture induces the highest spring back along the building (vertical) direction and the lowest along the horizontal direction after compression. The compressive stiffness, on the other hand, is the highest along horizontal direction and the lowest in vertical direction. The internal stresses due to SLM processing are another factor that may induce large martensite plates, decreasing the spring back. Although post-annealing (followed by furnace cooling) annihilates these large SLM stress-induced martensite plates, it is unsuccessful to achieve completely isotropic properties. The furnace cooling after annealing may even segregate austenite and martensite within SLM solidified tracks, causing a mixed shape memory response.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 650, 5 January 2016, Pages 225-232
Journal: Materials Science and Engineering: A - Volume 650, 5 January 2016, Pages 225-232
نویسندگان
S. Dadbakhsh, B. Vrancken, J.-P. Kruth, J. Luyten, J. Van Humbeeck,