کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7978907 | 1514718 | 2015 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and mechanical properties of Mg-Al-based alloy modified with cerium
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Mg90Al10-xCex with x=0, 1, 3 and 5 (at%) have been prepared by copper mold casting and the influence of Ce on the microstructure and mechanical properties have been investigated. The addition of 1% Ce decreases the volume fraction of the γ-Mg17Al12 phase and with the further increase of Ce to 3% and 5%, the γ-Mg17Al12 intermetallic disappears completely with the formation of the Al11Ce3 and Al2Ce intermetallic phases. The room temperature compression tests show that Ce addition significantly improves the room temperature mechanical properties. For example, the alloy with 5% Ce displays a strength of 448 MPa compared to 318 MPa of the binary Ce-free alloy along with appreciable plasticity of about 9%. This improvement is due to grain refinement as well as to the precipitation of the Al11Ce3 and Al2Ce strengthening phases.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 625, 11 February 2015, Pages 46-49
Journal: Materials Science and Engineering: A - Volume 625, 11 February 2015, Pages 46-49
نویسندگان
A.K. Chaubey, S. Scudino, K.G. Prashanth, J. Eckert,