کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7979005 | 1514717 | 2015 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of strain rate on true stress-true strain relationships of ultrafine-grained ferrite-cementite steels up to plastic deformation limit
ترجمه فارسی عنوان
اثر نرخ کرنش بر روابط واقعی کشش استرس واقعی فولادهای فریت-سیمانته فوق پررنگ تا حد تغییر شکل پلاستیک
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
استرس واقعی، فشار واقعی، نرخ فشار، اندازه دانه، فولاد،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
The true stress (Ï)-true strain (ε) relationships up to the plastic deformation limit of low-carbon ferrite-cementite (FC) steels with ferrite grain sizes between 0.5 and 34 μm were estimated at strain rates between 3.3Ã10â1 and 5.0Ã10â4 sâ1 to investigate the effect of the strain rate on the Ï-ε relationship. Both Ï and ε increased with increasing strain rate for each of the FC steels considered, and larger work-hardening rates were observed with increasing strain rate in the ultrafine-grained FC specimens with average ferrite grain sizes less than 1 μm. Increasing the strain rate was found to be effective in improving Ï and ε up to the plastic deformation limit. The important factors in obtaining good Ï-ε relationships in FC steels are the loads and the radius of curvature of the neck profile after the maximum load point. On the basis of experimental results that both Ï and ε can improve under high-speed deformation such as at 10â1 sâ1 (as in static tensile tests) and that the decrease in ductility with increasing strain rate was small, grain refinement of up to 0.8 μm was concluded to be effective in improving the tensile deformation behavior of the low-carbon FC steels considered in this study.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 626, 25 February 2015, Pages 441-448
Journal: Materials Science and Engineering: A - Volume 626, 25 February 2015, Pages 441-448
نویسندگان
N. Tsuchida, H. Nakano, T. Okamoto, T. Inoue,