The coupling influence of size effects and strain rates on the formability of austenitic stainless steel 304 foil

In order to understand the coupling influence of size effects and strain rates on the formability of the austenitic stainless steel 304 foils in micro scale, a series of micro scale limited dome height (LDH) tests were designed and conducted in three different speeds without lubricant on the annealed and as-received austenitic stainless steel 304 foils. In this study, a technique was developed to coat a layer of pure chromium (≈0.3 μm thick) on the foils and by using the etching process to make the micro square grids (50 μm × 50 μm) on the foils. Then, the foils were annealed at different temperatures for obtaining different microstructures. A set of the forming limit curves (FLC) of the foils were obtained and they can be used by industry right away for product design, process design and development, die design, and simulations, etc. Besides, the coupling influence of the size effects and the strain rates on the formability of the austenitic stainless steel 304 foils has been studied, observed and understood.