کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8012107 | 1516938 | 2016 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of post weld heat treatment on microstructure and mechanical properties of gas tungsten arc welded AA6061-T6 alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Double-V butt TIG welding process was performed on two plates of AA6061-T6 using ER5356 filler. The microstructure, mechanical and nanomechanical properties of the joint were evaluated in as-welded and after post weld heat treatment (PWHT) using XRD, FESEM, EBSD, nanoindentation and tensile tests. The results show that PWHT led to microstructural recovery of the heat affected zone (HAZ) in addition to the appearance of β-phase (Al3Mg2) at the grain boundaries of weld zone. The hardness (Hnano) in all zones increased after PWHT while the elastic modulus (Enano) was improved from 69.93 GPa to 81 GPa in weld area. All results indicate that PWHT has created a homogenous microstructure in the weld zone in addition to outstanding improvement in mechanical properties for the weld zone which surpass the base metal.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Transactions of Nonferrous Metals Society of China - Volume 26, Issue 12, December 2016, Pages 3102-3114
Journal: Transactions of Nonferrous Metals Society of China - Volume 26, Issue 12, December 2016, Pages 3102-3114
نویسندگان
Firouz FADAEIFARD, Khamirul Amin MATORI, Farhad GARAVI, Muath Al-FALAHI, Gholamreza Vahedi SARRIGANI,