Computerized instrumentation system for monitoring the tractor performance in the field

A high precision computerized instrumentation package was developed and mounted on a 50 kW tractor to monitor and measure various performance parameters of a tractor and implement system. The system was intended to be used for the compilation of a database of draft requirements of tillage implements. The system designed to measure: three-point linkage forces, ground speed, tillage depth, fuel consumption, forward speed, slip, engine speed, hydraulic pressure and fluid temperatures. The data acquisition unit was based on a high speed multi processors Campbell Scientific CR3000 data logger linked to a microcomputer using suitable transducer. The average calibration constants for the rear wheel speed, fuel consumption and three point linkage transducers were 0.0364 m/pulse, 0.000142857 l/pulse and 0.66 mV/kN respectively. The data acquisition system was capable of scanning rate up to 100 K sample/s. Data acquisition system was developed to measure draft of primary tillage implements in vertisol.

► Computerized instrumentation system to monitor various parameters of a tractor.
► The data acquisition system was capable of scanning rate up to 100 K sample/s.
► Resolution for the rear wheel speed = 0.0011769 m/pulse.
► Resolution for fuel consumption was 0.000142857 l/pulse.
► Resolution of data acquisition system reflects a high precision for transducers.