کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8016161 | 1517206 | 2016 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Weldability and mechanical properties of ultrasonic joining of aluminum to copper alloy with an interlayer
ترجمه فارسی عنوان
جوش پذیری و خواص مکانیکی پیوند التراسونیک آلومینیوم به آلیاژ مس با یک سطح بین دو لایه
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ریز ساختار، فلز مس، آلومینیوم، جوشکاری، ویژگی های مکانیکی، جوش پذیری،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
چکیده انگلیسی
Al/Cu joints with Al2219 alloy particle as an interlayer were successfully achieved using ultrasonic spot welding (USW) with different welding time and amplitude. Effects of welding parameters on the lap shear tensile strength of the joints were investigated. Based on the results, a sound Al/Cu joint was obtained, without gaps in the interface of Cu/interlayer. Compared with the conventional welding, plastic deformation in the copper side was greater and the lap shear tensile strength was higher. Welding parameters were optimized, and the lap shear tensile strength was highest when the welding time was 0.45 s and the amplitude was 45 µm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Letters - Volume 182, 1 November 2016, Pages 19-22
Journal: Materials Letters - Volume 182, 1 November 2016, Pages 19-22
نویسندگان
Z.L. Ni, F.X. Ye,