کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8026874 | 1517619 | 2014 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Control of bond coat microstructure in HVOF process for thermal barrier coatings
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The microstructure of bond coat was optimized by controlling coating parameters, such as spray distances, the gas flow ratio of air/oxygen/hydrogen, gun speed, and step distance, in high-velocity oxy-fuel process, and the effects of coating parameters on the microstructure and thermomechanical properties were investigated. When the spray distance to the substrate shortened, the microstructure became dense and the hardness values were increased. As the amount of hydrogen increased in the fixed gas flow ratio, defects such as global pores and oxides were increased and the hardness values were decreased, showing a similar trend in oxygen. The bond coat with the step distance of 8Â mm showed a slightly higher hardness value than that with the step distance of 5Â mm, indicating that the gun speed did not have much effect on the hardness value. However, in thermal diffusivity, the bond coat with the step distance of 5Â mm showed lower values than that with the step distance of 8Â mm. The optimum coating parameters could be proposed in HVOF process.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 260, 15 December 2014, Pages 63-67
Journal: Surface and Coatings Technology - Volume 260, 15 December 2014, Pages 63-67
نویسندگان
Sang-Won Myoung, Zhe Lu, Yeon-Gil Jung, Byung-Koog Jang, Ungyu Paik,