کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8028481 | 1517639 | 2014 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Surface modification of Ti-6Al-4V alloy via friction-stir processing: Microstructure evolution and dry sliding wear performance
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The friction-stir processing (FSP) method was employed to the surface modification of Ti-6Al-4V alloy applying different processing parameters. The defect-free friction-stir processed surface layers with ~ 2.5 mm thickness, with final microstructures of β-regions with acicular-α and GB-α, or Martensite-αⲠphase, were obtainable. The FSP processing thermal cycles, macro/micro-structures, phase evolutions, microhardness measurements, and dry-sliding wear performance of the processed surface layers were investigated. Considering to the basic laws of Ti-6Al-4V microstructure evolutions during the FSP procedures, the relations between processing parameters and produced microstructure characteristics were further elucidated. It was found that a relatively lower processing peak temperature and a fast enough cooling rate benefited the formation of the fine β-regions with ultra-refined acicular-α phase and/or even needle-typed Martensite-αâ². The microstructures favored the improvement of hardness and wear performance of the processed surface layers, in comparison with those properties of the base material.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 239, 25 January 2014, Pages 160-170
Journal: Surface and Coatings Technology - Volume 239, 25 January 2014, Pages 160-170
نویسندگان
Bo Li, Yifu Shen, Weiye Hu, Lei Luo,