کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8044313 | 1518918 | 2018 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and properties in the weld surface of friction stir welded 7050-T7451 aluminium alloys by laser shock peening
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سطوح، پوششها و فیلمها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Laser shock peening (LSP) was used to treat the weld surface of friction stir welded joints of 7050-T7451 alloys. After the LSP, a large number of micro-holes were formed in the shock region. The hardness of thermo-mechanically affected zone (TMAZ) and heat-affected zone (HAZ) at a distance from the upper surface of 0.5â¯mm increased obviously. The average hardness increased 9HV. The fatigue life after the LSP increases 30%, 27% and 5% when the loading stress is 200â¯MPa, 250â¯MPa and 300â¯MPa. The residual stress in weld nugget zone, TMAZ and HAZ generated a compressive residual stress, and the biggest value is 100â¯MPa after the LSP.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Vacuum - Volume 152, June 2018, Pages 25-29
Journal: Vacuum - Volume 152, June 2018, Pages 25-29
نویسندگان
Peng Liu, Siyu Sun, Shubo Xu, Yang Li, Guocheng Ren,