کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8067062 1521081 2018 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
CFD analysis of steam jet injection in a hybrid SIT
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی مهندسی انرژی و فناوری های برق
پیش نمایش صفحه اول مقاله
CFD analysis of steam jet injection in a hybrid SIT
چکیده انگلیسی
In the safety water injection system of an advanced nuclear power plant, APR+, steam is injected onto water inside a tank called a hybrid SIT. Depending on the condensation rate of steam and the rising time of pressure inside the tank, the performance of the system is determined. To understand the phenomena, an experiment with visualization and finely installed instrumentation was conducted. In parallel, simulation of the steam jet development and subsequent condensation was performed using a CFD code, STAR-CCM+. Each phenomenon was first validated by comparing with existing experiments; then, simulation on our hybrid SIT experiment was conducted. In the simulation, three domains of gas (steam and air), water, and wall were considered with fixed gas-water interface for convergence. As a result, pressure and temperature trends were compared between experiments and simulation. Pressure was over-predicted in simulation because of reduced water circulation under the fixed interface. The additional momentum source in the water interface enhanced the direct contact condensation and retarded the pressure rise, narrowing the gap between the experiment and the calculation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Annals of Nuclear Energy - Volume 115, May 2018, Pages 126-137
نویسندگان
, , ,