کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8072446 | 1521407 | 2018 | 33 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Optimization and characterization of a thermoelectric generator prototype for marine engine application
ترجمه فارسی عنوان
بهینه سازی و مشخص کردن یک نمونه اولیه ی گرما الکتریکی برای کاربرد موتور دریایی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ژنراتور ترموالکتریک، کاربرد دریایی، بازیابی گرما زباله، بهینه سازی سطح دستگاه،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی (عمومی)
چکیده انگلیسی
An analytical study on the effect of applied pressure on heat transfer coefficient has been made for tendency prediction. In a first step, two types of commercial TEM have been studied separately on the test rig. The engine data were extracted from a Diesel engine that shares the same principles with marine Diesel engine in terms of engine efficiency and exhaust conditions. Results showed an optimum clamping pressure for the TEG device corresponding to a compressive stress of 0.35 MPa. These results were coherent with the predicted ones in the analytical study. The Bismuth-Telluride TEM showed a 70% higher power output compared to SiliconGermanium TEM, but rapid deterioration of the TEM occurred when air inlet temperature in the TEG exceeded 300 °C.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy - Volume 143, 15 January 2018, Pages 682-695
Journal: Energy - Volume 143, 15 January 2018, Pages 682-695
نویسندگان
A. Nour Eddine, D. Chalet, X. Faure, L. Aixala, P. Chessé,