کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
821318 | 906753 | 2010 | 7 صفحه PDF | دانلود رایگان |
An anhydride-cured thermosetting epoxy polymer was modified by incorporating 10 wt.% of well-dispersed silica nanoparticles. The stress-controlled tensile fatigue behaviour at a stress ratio of R = 0.1 was investigated for bulk specimens of the neat and the nanoparticle-modified epoxy. The addition of the silica nanoparticles increased the fatigue life by about three to four times. The neat and the nanoparticle-modified epoxy resins were used to fabricate glass fibre reinforced plastic (GFRP) composite laminates by resin infusion under flexible tooling (RIFT) technique. Tensile fatigue tests were performed on these composites, during which the matrix cracking and stiffness degradation was monitored. The fatigue life of the GFRP composite was increased by about three to four times due to the silica nanoparticles. Suppressed matrix cracking and reduced crack propagation rate in the nanoparticle-modified matrix were observed to contribute towards the enhanced fatigue life of the GFRP composite employing silica nanoparticle-modified epoxy matrix.
Journal: Composites Science and Technology - Volume 70, Issue 1, January 2010, Pages 193–199