Gamma radiation effects on random copolymers based on poly(butylene succinate) for packaging applications

Within the context of new bioplastic materials, poly(butylene succinate) (PBS) and four novel poly(butylene/thiodiethylene succinate) random copolymers (PBS-PTDGS), in sheets as well as in films, were exposed to gamma radiation, in air and in water, and their behavior along with the effect on their biodegradability was investigated. The molecular weight data obtained from gel permeation chromatography indicate that the sensibility to radiation increases with the amount of sulfur-containing co-unit (TDGS). At 200 kGy the average molecular weight of PBS film halves, while for P(BS60TDGS40) the residual molecular weight is about 20%. The calculated intermolecular crosslink Gx and scissioning Gs yields confirmed that degradation is predominant over crosslink for all the aliphatic systems. As shown by thermal analyses, gamma radiation affects the thermal properties, leading to an increased crystallinity of the systems, remarkable for PBS, and lower decomposition temperatures. Variations of crystallinity with the increasing absorbed dose were confirmed also by PALS analyses. Water contact angle measurements revealed post-irradiation wettability alterations that could positively affect polymer biodegradability. In particular, when irradiated in water at 100 kGy PBS film exhibits a water contact angle decrease of about 17%, indicating an enhanced wettability. After degradation in compost, changes in the surface morphology were observed by means of SEM and sample weight losses were determined, at different extent, according to the irradiation environment. Interestingly, after 52 days in compost PBS films, both pristine and irradiated in air at 25 kGy, showed a residual weight of about 60%, while the ones irradiated in water at 25 kGy of about 44%. Experimental data confirmed that gamma irradiation could represent a viable treatment to enhance biodegradation in compost of PBS and PBS-based copolymers.