کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
828207 | 1470289 | 2016 | 9 صفحه PDF | دانلود رایگان |
• The W fiber orientation (θf) had great effect on the dynamic mechanical behavior.
• The composites exhibited the most excellent mechanical properties at θf of 0°.
• The composites exhibited different failure modes when θf ranged from 0° to 90°.
• The composites exhibited inconsistent strain rate sensitivity with different θf.
The anisotropic dynamic mechanical behavior of the W fiber/Zr-based bulk metallic glass composites (Wf/BMGCs) with different W fiber orientations (θf) were investigated by split Hopkinson pressure bar (SHPB) and finite element method (FEM). The composites exhibited the most excellent mechanical properties at θf of 0° while the poorest at θf of 45°. The composites failed by longitudinal splitting at θf of 0°, shearing at θf of 45°, a mixture of shearing and splitting during 0° < θf < 45° or 45° < θf < 90°, and a mixture of shearing and transverse splitting at θf of 90°. Strain rate sensitivity of the composites also varied with θf, exhibiting positive strain rate sensitivity at θf of 0°, 15°, 60°, and 75° ranging from the strain rate of 10− 3 to 2.1 × 103 s− 1, positive strain rate sensitivity with the strain rate ranging from 10− 3 to 10− 2 s− 1 but negative strain rate sensitivity from 10− 2 to 2.1 × 103 s− 1 at θf of 30° and 90°, and even strain rate insensitivity at θf of 45°.
Figure optionsDownload as PowerPoint slide
Journal: Materials & Design - Volume 93, 5 March 2016, Pages 485–493