کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
833456 908144 2007 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Deformation inhomogeneity in flattened copper wire
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
Deformation inhomogeneity in flattened copper wire
چکیده انگلیسی

The deformation inhomogeneity in flattened wire produced by the wire flat rolling process is studied. Utilizing the combined Finite and Slab Element Method (FSEM), the effective strain fields in the flattened wire are calculated at different reductions in height and frictional conditions and compared with experiment. The calculated and experimental results exhibit that the deformation is inhomogeneous and macroscopic shear bands are appeared in the cross section of flattened wire. Using the results of the analysis, it is shown that the deformation inhomogeneity, introduced by an Inhomogeneity Factor (IF), is different on the x-axis and y-axis in the cross section of the flattened wire. By decreasing the reduction in height of wire and increasing the friction factor, the deformation inhomogeneity is increased and the effect of friction factor is more pronounced at large reduction in height. The variation in IF with the reduction in height is presented by a fourth order polynomial.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 28, Issue 7, 2007, Pages 2047–2053
نویسندگان
, ,