Agricultural applications of a low-cost infrared thermometer

Plant canopy temperature is used in many studies of plant/environment interactions and non-contact measurement is often made with radiometric surface thermometers commonly referred to as infrared thermometers. Industrial-quality infrared thermocouples are widely available and often used in agricultural research. While research on canopy temperature has provided management tools for production agriculture, the high cost of the industrial-quality infrared thermocouples has limited their adoption and use in production agriculture settings. Our objective was to evaluate a low-cost consumer-quality infrared thermocouple as a component of a wireless thermal monitoring system designed for use in a production agriculture setting. The performances of industrial-quality and low-cost consumer-quality sensors were compared under controlled constant temperature and under field conditions using both grass and cotton canopies. Results demonstrate that under controlled constant-temperature the two types of infrared thermocouples were “significantly the same” at 10 °C, 20 °C and 30 °C and “significantly not the same” at 40 °C and 50 °C. Across the temperature range tested, the consumer-quality infrared thermocouples temperature reading was closer to the thermocouple reading than the industrial-quality infrared thermocouples. A field comparison of industrial-quality and consumer-quality infrared thermocouple sensors monitoring a grass canopy and a cotton canopy indicated that the two types of sensors were similar over a 13–35 °C range. The measurement of temperature made with two types of sensors would not differ significantly. Based on these results we conclude that the lower-cost consumer-quality infrared thermometers are suitable for use in production agricultural applications.