کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
865480 | 909670 | 2009 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and Mechanical Properties of FeAl Intermetallics Prepared by Mechanical Alloying and Hot-Pressing
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
FeAl intermetallics were prepared by mechanical alloying and vacuum hot-pressing. The Fe-48 at.% Al powder was ball-milled for 3-12 h, producing a solid solution structure of Fe (Al) with trace Al (Fe). Subsequent vacuum annealing or hot-pressing introduced phase transformations into the FeAl (B2) intermetallics and Al2O3 inclusions. The hot-pressed FeAl intermetallics possess a high flexural strength of 831 MPa and a fairly good strain at break of 3.2%. The results show that the addition of 0.5 at.% B reduces the peak temperature for hot-pressing from 1180°C to 1100°C, and increases the density of the compacts from 95% to 96.3%, but results in no significant improvement in the mechanical properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tsinghua Science & Technology - Volume 14, Issue 3, June 2009, Pages 300-306
Journal: Tsinghua Science & Technology - Volume 14, Issue 3, June 2009, Pages 300-306
نویسندگان
Song (å®æµ·é), Wu (å´è¿æ°), Tang (åä¼ å®), Yuan (è¢ å¸
), Gong (å·©åæ), Liang (æ¢ å),