Mechanics of cranial sutures using the finite element method

To investigate how cranial suture morphology and the arrangement of sutural collagen fibres respond to compressive and tensile loads, an idealised bone–suture–bone complex was analysed using a two-dimensional finite element model. Three suture morphologies were simulated with an increasing interdigitation index (I.I.): butt-ended, moderate interdigitated, and complex interdigitated. The collagen matrix within all sutures was modelled as an isotropic material, and as an orthotropic material in the interdigitated sutures with fibre alignment as reported in studies of miniature pigs. Static uniform compressive or tensile loading was applied to the complex. In interdigitated sutures with isotropic material properties, the orientation of the maximum (tensile) principal stresses within the suture matched the collagen fibre orientation observed in compressed and tensed sutures of miniature pigs. This suggests that randomly arranged sutural collagen fibres could optimise to an orientation most appropriate to withstand the predominant type of loading. A compression-resistant fibre arrangement imparted the highest suture strain energy relative to the isotropic and tension-resistant arrangements, indicating that this configuration maximises energy storage. A comparison across the different suture morphologies indicated that bone strain energy generally decreased with a decrease in I.I., irrespective of the sutural fibre arrangement. However, high bone stress at the interdigitation apices shifted to the limbs of the suture with an increase in I.I. These combined findings highlight the importance of suture morphology and anisotropy as properties having a significant influence on sutural mechanics.