کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8864953 1620643 2018 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Development of stress correction formulae for heat formed steel plates
ترجمه فارسی عنوان
توسعه فرمول اصلاح استرس برای صفحات فولادی حرارت داده شده
کلمات کلیدی
ورودی حرارتی، تجزیه و تحلیل انتقال حرارت، گرمایش خط، بشقاب شل، تصحیح استرس، تجزیه و تحلیل پلاستیک حرارتی،
ترجمه چکیده
فرایند گرمایش مانند گرمایش خط، گرمایش مثلثی و غیره به طور گسترده ای در صفحات تشکیل صفحات پوسته موجود در کمان و قسمت پشتی پوسته بیرونی در یک کشتی استفاده می شود. انقباض موضعی در طول روند حرارت دادن، پدیده اصلی فیزیکی مورد استفاده در فرایند تشکیل صفحات است. همانطور که به خوبی قابل قبول است، با توجه به روند حرارتی شدید، ورق گرم تغییر در خواص مواد و مکانیکی در اطراف منطقه گرم می شود. بنابراین، مهم است که تغییرات خواص فیزیکی و مکانیکی را با توجه به فرایند گرمایی مورد بررسی قرار دهیم تا آنها از مرحله طراحی صفحات پوسته استفاده کنند. این مطالعه مربوط به توسعه فرمول معادله پایدار سختی برای ورق فولادی است که در آن گرمای خط اعمال می شود. در این مطالعه فرمول اصلاح استرس برای صفحات گرم شده براساس شبیه سازی عددی آزمایش کششی با ضخامت ورق مختلف و سرعت گرمایش از طریق تجزیه و تحلیل رگرسیون چند مورد متغیری توسعه داده شده است. دیده شده است که فرمول توسعه یافته توافق بسیار خوبی با نتایج شبیه سازی عددی را نشان می دهد. این مقاله با استفاده از فرمول فعلی در بررسی ویژگی ساختاری بدنه کشتی به پایان می رسد.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات اقیانوس شناسی
چکیده انگلیسی
The heating process such as line heating, triangular heating and so on is widely used in plate forming of shell plates found in bow and stern area of outer shell in a ship. Local shrinkage during heating process is main physical phenomenon used in plate forming process. As it is well appreciated, the heated plate undergoes the change in material and mechanical properties around heated area due to the harsh thermal process. It is, therefore, important to investigate the changes of physical and mechanical properties due to heating process in order to use them plate the design stage of shell plates. This study is concerned with the development of formula of plastic hardening constitutive equation for steel plate on which line heating is applied. In this study the stress correction formula for the heated plate has been developed based on the numerical simulation of tension test with varying plate thickness and heating speed through the regression analysis of multiple variable case. It has been seen the developed formula shows very good agreement with results of numerical simulation. This paper ends with usefulness of the present formula in examining the structural characteristic of ship's hull.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Naval Architecture and Ocean Engineering - Volume 10, Issue 2, March 2018, Pages 141-152
نویسندگان
, ,