کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8865064 1620650 2017 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
On the material properties of shell plate formed by line heating
ترجمه فارسی عنوان
در خواص مواد پوسته تشکیل شده توسط گرمایش خط
کلمات کلیدی
گرمایش خط، مشخصات پلاستیک و شکستگی پراکندگی پراکندگی، آزمایش میکروسکوپی، خواص مواد، خنک کننده آب
ترجمه چکیده
این مقاله با بررسی خصوصیات مواد پلاستیکی ورق فولادی که بوسیله روش گرمایش خط ساخته شده است، در نظر گرفته شده است و با هدف اجرای طراحی منطقی طراحی شده با توجه به شرایط محدود تصادفی مانند برخورد یا زمین بکار می رود. برای مطالعه حاضر، آزمایش گرمایش خطی برای ورق فولادی درجه مایع با ضخامت ورق مختلف و سرعت گرما انجام شده است و سپس آزمایش میکروسکوپی و آزمون کششی انجام شده است. از میکروسکوپی، مشخص شده است که مناطق تصفیه شده دانه مانند فریت و پرلیت در سراسر منطقه آسیب دیده تشکیل شده است. از نتایج آزمون کششی، دیده می شود که قدرت عملکرد، مقاومت کششی، کشش شکست، ضریب سخت شدن و ضریب استحکام با ضخامت ورق و مقدار ورودی گرما متفاوت است. بنابراین، فرمولها مربوط به خواص مادی و پارامتر ورودی گرمایی باید برای طرح طراحی با توجه به بارگذاری تصادفی مشخص شده باشد. این مقاله با توصیف گسترش تحقیق حاضر به پایان می رسد.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات اقیانوس شناسی
چکیده انگلیسی
This paper is concerned with investigating the plastic material properties of steel plate formed by line heating method, and is aimed at implementing more rational design considering the accidental limit states such as collision or grounding. For the present study, line heating test for marine grade steel plate has been carried out with varying plate thickness and heating speed, and then microscopic examination and tensile test have been carried out. From the microscopic, it is found that the grain refined zones like ferrite and pearlite are formed all around the heat affected zone. From the tensile test results, it is seen that yield strength, tensile strength, fracture strain, hardening exponent and strength coefficient vary with plate thickness and heat input quantity. The formulae relating the material properties and heat input parameter should be, therefore, derived for the design purpose considering the accidental impact loading. This paper ends with describing the extension of the present study.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Naval Architecture and Ocean Engineering - Volume 9, Issue 1, January 2017, Pages 66-76
نویسندگان
, ,