کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8948564 1645669 2018 41 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Freeze-cast alumina pore networks: Effects of processing parameters in steady-state solidification regimes of aqueous slurries
ترجمه فارسی عنوان
شبکه های منفرد آلومینای یخ ریخته شده: اثرات پارامترهای پردازش در حالت های حالت جامد شدن آبسنگ های آبی
ترجمه چکیده
دوغاب آلومینای آبی با بارگذاری مواد جامد مختلف و اندازه ذرات، تحت شرایط هفدهم انجماد قرار گرفتند تا تاثیر این ویژگی ها بر ویژگی های شبکه منفذی از جمله اندازه خاک و مساحت مشخصه هندسی مشخص شود. دمای لجن در موقعیت به منظور تعیین موقعیت و سرعت جریان انجماد در مرحله جامد ثبت شد و سپس با استفاده از رگرسیون تجزیه و تحلیل شد و با استفاده از نظریه انجماد تجزیه شد. مدل های کلاسیک ریاضی برای وابستگی زمان به جلو و موقعیت جبهه یخ زدگی برای دوغابهای فریزر در نظر گرفته شد. بر اساس این ساختار، یک مسئله ی تک فاز استفان برای توصیف سینتیک یخ زده استفاده شد. مدل های برای انجماد سرعت های جلو با تئوری انجماد ترکیبی به دست آمده برای پیش بینی های ویژگی های ریز ساختاری از جنبش انجماد به دست آمد. نتایج نشان داد که در حالی که ممکن است وابستگی به بارگذاری جامدات وجود داشته باشد، ترکیبی از مدل سازی ریاضی جامد سازی و نظریه ی جامد شدن کلاسیک برای سرامیک یخ ریخته شده و دقیق ویژگی های شبکه حفره از پارامترهای پردازش را توصیف می کند.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سرامیک و کامپوزیت
چکیده انگلیسی
Aqueous alumina slurries with varying solids loading and particle size were freeze cast under seven freezing conditions to investigate the influence of these on pore network characteristics including pore size and geometric specific surface area. Slurry temperatures were recorded in situ to determine freezing front position and velocity during solidification, which were then analyzed via regression and modeled using solidification theory. Classic mathematical models for the time dependence of freezing front position and velocity were found to hold for freeze-cast slurries. Building on these, a one-phase Stefan problem was used to describe freezing kinetics. Models for freezing front velocity were combined with solidification theory to obtain predictions of microstructural feature size from freezing kinetics. Results showed that, while there may be a dependence on solids loading, the combination of mathematical modeling of solidification and classic solidification theory is applicable to freeze-cast ceramics and accurately describes pore network characteristics from processing parameters.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 38, Issue 15, December 2018, Pages 5134-5143
نویسندگان
, , , ,