Soft tissue contributions to impact forces simulated using a four-segment wobbling mass model of forefoot–heel landings

The purpose of this investigation was to develop and evaluate a wobbling mass model of a female performing a drop landing and to examine the influence of soft tissue properties on the impact loads experienced. A planar model comprising a foot, shank, thigh and upper body segment was developed. Spring-damper systems coupled the foot to the ground and the wobbling masses to the rigid masses. Unlike traditional wobbling mass models of landing, the model included a foot segment, which allowed replication of forefoot–heel landing techniques and also used subject and movement-specific properties to simulate the landings. Kinematics and force data collected for three drop landings (height 0.46 m) performed by a female were separately used to drive and evaluate the model. The wobbling mass model successfully reproduced the measured force profiles to 9% (RMS differences) of the measured range and replicated the measured peak vertical ground reaction forces to 6%. The accuracies of the wobbling mass model and a corresponding rigid mass model were compared. The inclusion of soft tissue properties in the model contributed up to an 8.6 bodyweights reduction in peak impact loading and produced a 52% more accurate replication of the measured force profiles. The prominent role soft tissues have in load attenuation and the benefits of modelling soft tissue in simulations of landings were therefore highlighted. The success of the wobbling mass model in replicating the kinetics of actual landing performances suggests the model may be used in the future to gain a realistic insight into load attenuation strategies used by females.