Assessing the impact of land-applied biosolids from a thermomechanical (TMP) pulp mill to a suite of terrestrial and aquatic bioassay organisms under laboratory conditions

The potential impact on a variety of bioassay organisms when pulp-mill biosolids from a thermomechanical pulp mill (western Canada) were applied to a reference soil has been investigated in a laboratory setup. The current research assessed acute, chronic, and reproductive impacts using a battery of terrestrial and aquatic organisms. Terrestrial organisms were exposed to soil amended with different concentrations of biosolids, while aquatic organisms were used to assess the impact of biosolids' runoff into receiving waters. The former bioassays showed that an application rate of 20 tonnes hectare−1 (t ha−1) “bone-dry” biosolids applied to reference soil produced no observable adverse impact on the terrestrial organisms. In the latter assays, undiluted (100%) and 50% diluted biosolids' runoff into receiving water had a detrimental impact on the aquatic organisms. However, concentrations not exceeding 25% (environmentally relevant concentrations) had neither an acute nor chronic impact compared to reference populations. The organisms' abilities to reproduce were also unaltered. While this study only examined the biosolids from one mill, there is the potential that land-application of characteristically well-defined pulp mill biosolids may constitute an acceptable way of disposing of pulp and paper mill biosolid residues. However, the biosolids coming from different mills, with differing processes, must be dealt with on a case-by-case situation. Each series of biosolids must be rigorously tested for toxicological impact in the laboratory under tightly controlled conditions. Subsequently, field experimentation must be conducted before definitive conclusions can be made.