Why is methenamine detected in Goma-2 dynamites originally methenamine free? An interpretation of relevant forensic results

After the train bombing in Madrid (Spain) on 11 March 2004, methenamine was detected in some of the specimens of Goma-2 ECO dynamite submitted to the forensic laboratories when analyzed by gas chromatography coupled with mass spectrometry detection (GC–MS). Methenamine is synthesized from formaldehyde and ammonia through a condensation reaction. However, neither methenamine nor any of these compounds were used to manufacture Goma-2 ECO dynamite. Four different experiments were designed in order to explain the presence of methenamine detected in the dynamite samples analyzed. In the first one, GC–MS was used to analyze the individual components of Goma-2 ECO provided by the manufacturer and the components mixed in a raw paste. Methenamine was detected in the manufacturer's ammonium nitrate and in the raw paste. The other experiments were designed to find the precursors sources for methenamine generation in Goma-2 ECO. Results revealed that these sources could be ammonium nitrate for ammonia and sawdust for formaldehyde. Under heating conditions, dynamite could produce these precursors, which could condense in the injection port of the GC–MS system and generate methenamine. However, methenamine was not always detected in these dynamites. This was explained by the existence of two opposite effects: (a) dynamite stability makes difficult that ammonium nitrate releases ammonia and (b) there is a gradual loss of formaldehyde in sawdust along the time. Both effects can prevent the formation of an amount of methenamine large enough to be detected.