Experimental study of velocity-scalar filtered joint density function for LES of turbulent combustion

The velocity-scalar filtered joint density function (FJDF) used in large eddy simulation (LES) of turbulent combustion is experimentally studied. Measurements are made in the fully developed region of an axisymmetric turbulent jet using an array consisting of three X-wires and resistance-wire temperature sensors. Filtering in the cross-stream and streamwise directions is realized by using the array and by invoking Taylor's hypothesis, respectively. The means of the FJDF conditional on the subgrid-scale (SGS) turbulent kinetic energy and the SGS scalar variance at a given location range from close to joint normal to bimodal with the peaks separated in both velocity and scalar spaces, which correspond to qualitatively different mixing regimes. For close to joint normal FJDFs, the SGS fields are well mixed. For bimodal FJDFs, the conditionally filtered scalar diffusion and dissipation strongly depend on the SGS velocity and scalar, consistent with a combination of diffusion layers and plane strain in the SGS fields, which is similar to the counter-flow model for laminar flamelets. The results suggest that in LES, both mixing regimes could potentially be modeled accurately. The velocity field affects the SGS variance and the filtered scalar dissipation rate primarily by changing the degree of nonequilibrium of the SGS scalar and the SGS time scale, respectively. This study further demonstrates the importance of including velocity in mixing models.