Study on the early stage of runaway reaction using Dewar vessels

In this paper, compared with a UN cylindrical 500 mL Dewar (H.4 in the UN tests), a spherical 1 L Dewar vessel was used to study the early stages of runaway reactions of several liquid and solid samples, including three organic peroxides and a reactive material. The samples were filled in the vessels and the temperature profiles versus times at different positions of the samples were measured. As a result, the minimum temperatures, defined as the SADT, were averagely 10 K lower than those measured in the cylindrical Dewar vessels. At the same time, the temperature profiles of solids in the spherical Dewars tended to be homogeneous. The heat transfer coefficient of a spherical Dewar is only 0.18 W/K/m, one-eighth of a conventional cylindrical Dewar vessel. Meanwhile it has a low phi factor. These factors are essential to simulate low heat loss bulk conditions in the equilibrium process and at the early stage of a runaway reaction. To characterize the ability of the adiabaticity of a storage vessel, it can be seen that a spherical Dewar could simulate the plant process having critical storage size of a reactive-material, r0, approximately 0.6 m. It is recommended that such a technique is used to investigate the SADT of an unstable material in larger scale packaging or a material with very weak heat release in industry.