Effects of iron catalyst on the formation of crystalline domain during carbonization of electrospun acrylic nanofiber

To investigate the effects of introducing the iron compound on the carbonization behavior polyacrylonitile (PAN)-based electrospun nanofibers were carbonized with or without iron(III) acetylacetonate (AAI) over the temperature range of 900-1500 °C in nitrogen atmosphere. The morphological characteristics of the carbon nanofibers were investigated using X-ray diffractometer (XRD), Raman spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The electrical conductivity of the carbon nanofiber web was measured by four-point probe method. The iron catalyst had a profound effect on the crystal structure of the carbonized nanofiber. In the presence of AAI the nanofibers carbonized at 1300 °C developed graphite structure, which could be obtained at the temperature higher than 2000 °C in the absence of the catalyst. The in-plane size of the graphite crystals (La) was measured to be about 6.5 nm by Raman spectroscopy and the (0 0 2) spacing by XRD was 0.341 nm.