کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9796186 | 1514942 | 2005 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Optimizing homogenization parameters for better stretch formability in an Al-Mn-Mg alloy sheet
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The present study examines the effect of homogenization of roll-cast material on the formability and microstructure of Al-Mn-Mg alloy sheets under uniaxial and biaxial deformation modes. The effect of various process variables investigated and an optimized homogenization cycle for improving the stretch formability are presented. The stretch formability of sheets have been characterized in terms of limit strains in forming limit diagrams (FLDs). The phenomenon of recrystallization and the effect of second phase particles have been investigated in cold rolled sheets and the limiting grain sizes at different annealing temperature calculated on the basis of the Zener limit equation. It appears that surface roughening which is in turn a result of grain coarsening is an important formability parameter in the homogenized materials annealed at high temperatures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 399, Issues 1â2, 15 June 2005, Pages 173-180
Journal: Materials Science and Engineering: A - Volume 399, Issues 1â2, 15 June 2005, Pages 173-180
نویسندگان
M. Aghaie-Khafri, R. Mahmudi,