کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9796344 | 1514945 | 2005 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Heat treatment of multi-element low alloy wear-resistant steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Heat treatment of multi-element low alloy wear-resistant steel Heat treatment of multi-element low alloy wear-resistant steel](/preview/png/9796344.png)
چکیده انگلیسی
The effect of heat treatment on the performances of multi-element low alloy wear-resistant steel (MLAWS), which is used to make the rolling mill torii liner, was investigated. The results show that the hardness and tensile strength increase as the quenching temperature is increased from 840 to 900 °C. However, the hardness decreases rapidly as the quenching temperature is increased beyond 900 °C, while the temperature has little influence on the tensile strength when it exceeds 900 °C. No clear influence on the impact toughness has been observed unless the quenching temperature is beyond 920 °C. As the tempering temperature exceeds 300 °C, tiny É carbides separate out from martensite and bainite complex structures and cause the carbon content in the complex structures to decrease. This results in the toughness to increase significantly. The best wear resistance can be obtained by tempering at 350 °C. The optimum heat treatment of MLAWS comprises quenching at 900-920 °C and tempering at 350-370 °C.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 396, Issues 1â2, 15 April 2005, Pages 206-212
Journal: Materials Science and Engineering: A - Volume 396, Issues 1â2, 15 April 2005, Pages 206-212
نویسندگان
Hanguang Fu, Qiang Xiao, Hanfeng Fu,