کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9809755 | 1517715 | 2005 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mechanics of delamination of a brittle coating strip on a brittle substrate
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A shear lag analysis was developed to quantify the nature of the stresses that develop both within a strip of brittle coating adhered to a brittle substrate and at the coating/substrate interface. The results are compared to results obtained using a more rigorous finite element model. As expected from the shear-lag analysis, the maximum interfacial shear stresses predicted by this model was at the coating ends in the coating/substrate interfacial layer, whereas axial compressive stresses within the coating itself were zero at the coating ends and were a maximum at the center of the coating. In this shear-lag model, the magnitude of these stresses as a function of the applied compressive stress was derived in terms of a single non-dimensional parameter, κ, that took into account the elastic and geometric properties of the coating and the substrate. The results of the shear-lag analysis were fully consistent with the finite element model results except at the corner between the coating and the substrate wherein the finite element model predicted a singularity. An approximate expression for the interfacial fracture toughness was obtained in terms of κ and in terms of the compressive stress at the onset of coating delamination using the analysis.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 195, Issues 2â3, 31 May 2005, Pages 280-286
Journal: Surface and Coatings Technology - Volume 195, Issues 2â3, 31 May 2005, Pages 280-286
نویسندگان
Shanti V. Nair, Ian R. Grosse,