کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9809899 | 1517718 | 2005 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Surface morphology of a laser surface nitrided and etched Ti-6Al-4V alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A laser surface nitriding process was applied to a Ti-6Al-4V alloy to obtain a surface layer consisting of TiN dendrites and a titanium alloy matrix. The dendritic volume fraction can be controlled by varying the nitrogen flow rate during the laser gas nitriding. By subsequently applying a selective etching process, the matrix material in the alloyed layer can be selectively removed and a three-dimensional network of TiN dendrites is left on the surface anchoring on the substrate. The 3D dendritic network provides extra surface area and a locking mechanism for the adhesion joint with a ceramic layer. The interface cross-section microstructure of such adhesion jointing surfaces is discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 192, Issues 2â3, 21 March 2005, Pages 341-346
Journal: Surface and Coatings Technology - Volume 192, Issues 2â3, 21 March 2005, Pages 341-346
نویسندگان
H.C. Man, N.Q. Zhao, Z.D. Cui,