The in vitro elution characteristics of vancomycin and tobramycin from calcium sulfate beads

The purpose of this study was to determine the elution characteristics of vancomycin and tobramycin when mixed with calcium sulfate to form antibiotic beads. Calcium sulfate was combined with vancomycin and tobramycin separately to form 2 types of antibiotic beads, which were packaged and labeled separately. The packaged calcium sulfate beads with vancomycin and tobramycin were then gas sterilized. The beads were placed in phosphate-buffered saline and kept at 36°C for 6 weeks. Two separate series of assays were run simultaneously for both types of beads. In one assay, a bead containing vancomycin was placed in a fresh vial of phosphate buffered saline after each assay. The same was done with beads containing tobramycin. In the second series of assays, 9 vials of phosphate buffered saline each containing 1 vancomycin bead and 9 vials of phosphate buffered saline each containing 1 tobramycin bead was arranged. The phosphate-buffered saline was then assayed at predetermined times for both the vancomycin bead series and the tobramycin bead series. The amount of vancomycin and tobramycin assayed nearly equaled the calculated amount of antibiotic per bead measured before bead construction. Also, the elution of antibiotic from the calcium sulfate was complete within 72 hours. In conclusion, the construction and gas sterilization of calcium sulfate beads containing vancomycin and tobramycin does not destroy vancomycin and tobramycin. Also, the complete elution of available vancomycin and tobramycin in calcium sulfate beads occurs within 72 hours.