Effect of nitrogen plasma immersion ion implantation of polyamide-6 on its sliding properties against steel surface Fulltext Access 8 Pages 2012
Fundamental understanding of the tribological and thermal behavior of Ag-MoS2 nanoparticle-based multi-component lubricating system Fulltext Access 8 Pages 2012
Single abrasive particle impingements as a benchmark to determine material removal modes in micro ultrasonic machining Fulltext Access 8 Pages 2012
Wear characteristics of nano TiAlN-coated carbide tools in ultra-high speed machining of AerMet100 Fulltext Access 8 Pages 2012
Tribological properties of Al2O3 hard coatings modified by mechanical blasting and polishing post-treatment Fulltext Access 8 Pages 2012
Friction and wear of periodically micro-patterned polypropylene in dry sliding Fulltext Access 8 Pages 2012
Numerical simulation of solid particle impacts on Al6061-T6 Part II: Materials removal mechanisms for impact of multiple angular particles Fulltext Access 8 Pages 2012
Experimental study of a potential weakening effect in spheres with thin hard coatings Fulltext Access 8 Pages 2012
Tribological performance of silicone composite coatings filled with wax-containing microcapsules Fulltext Access 8 Pages 2012
The lubrication of poly(etheretherketone) by an aqueous solution of nattokinase Fulltext Access 8 Pages 2012
An experimental investigation of the scratch behaviour of polymers: 1. Influence of rate-dependent bulk mechanical properties Fulltext Access 8 Pages 2012
Apparatus for continuous wear measurements during wet clutch durability tests Fulltext Access 8 Pages 2012
Wear mechanisms and in-service surface modifications of a Stellite 6B Co-Cr alloy Fulltext Access 8 Pages 2012
Mapping the micro-abrasion resistance of a Ni-based coating deposited by PTA on gray cast iron Fulltext Access 8 Pages 2012
Cavitation erosion of silver plated coatings in a low-temperature environment Fulltext Access 8 Pages 2012
Tribo electrochemical behavior of ferrite and ferrite-martensite stainless steels in chloride and sulfate media Fulltext Access 8 Pages 2012
Modification of polyetherimide by phenylethynyl terminated agent for improved tribological, macro- and micro-mechanical properties Fulltext Access 8 Pages 2012
The influence of grain size and surface treatment on the tribofilm formation on alumina components Fulltext Access 8 Pages 2012
The effect of a novel CoCr electropolishing technique on CoCr-UHMWPE bearing frictional performance for total joint replacements Fulltext Access 8 Pages 2012
Computational investigation of slip rate dependent friction as a potential contribution to displacement bursts in nanoindentation of nickel Fulltext Access 8 Pages 2012
Nano-level finishing of single crystal silicon blank using magnetorheological finishing process Fulltext Access 8 Pages 2012
Theory analysis of asymmetrical electric double layer effects on thin film lubrication Fulltext Access 8 Pages 2012
Preparation, microstructure and tribological behavior of laser cladding NiAl intermetallic compound coatings Fulltext Access 8 Pages 2012
Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty Fulltext Access 8 Pages 2012
A new method to investigate the sliding wear behaviour of materials based on energy dissipation: W-25Â wt%Cu composite Fulltext Access 8 Pages 2012
Correlation between wear resistance and subsurface recrystallization structure in copper Fulltext Access 8 Pages 2012
Investigating the influence of sand particle properties on abrasive wear behaviour Fulltext Access 8 Pages 2012
Promoting the high load-carrying capability of Al-20Â wt%Sn bearing alloys through creating nanocomposite structure by mechanical alloying Fulltext Access 8 Pages 2012
Applying a population growth model to simulate wear of rough surfaces during running-in Fulltext Access 8 Pages 2012
Effect of surface contact conditions on the stick-slip behavior of brake friction material Fulltext Access 8 Pages 2012
Parametric effects on the erosion-corrosion rate and mechanism of carbon steel pipes in oil sands slurry Fulltext Access 8 Pages 2012
Effect of nitrogen and molybdenum ion implantation in the tribological behavior of AA7075 aluminum alloy Fulltext Access 8 Pages 2012
Friction conditions in the bearing area of an aluminium extrusion process Fulltext Access 8 Pages 2012
Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon Fulltext Access 8 Pages 2012
Experimental equipment for fretting corrosion simulation in heavy liquid metals for nuclear applications Fulltext Access 8 Pages 2012
Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion Fulltext Access 8 Pages 2012
Mechanical and physico-chemical study of sulfur additives effect in milling of high strength steel Fulltext Access 8 Pages 2012
Experimental characterization of friction coefficient at the tool-chip-workpiece interface during dry cutting of AISI 1045 Fulltext Access 8 Pages 2012
Evaluation of tribo-characteristics of diamond-like-carbon containing Si by metal forming simulators Fulltext Access 8 Pages 2012
Identification of the work of plastic deformation and the friction shear stress in wire drawing Fulltext Access 8 Pages 2012
Degradation of carbofuran derivatives in restricted water environments: Basic hydrolysis in AOT-based microemulsions Fulltext Access 8 Pages 2012
Initiation and growth of gaseous cavity in concentrated contact in various surrounding gases Fulltext Access 8 Pages 2012
Film thickness in a ball-on-disc contact lubricated with greases, bleed oils and base oils Fulltext Access 8 Pages 2012
The effect of thermal conductivity and friction coefficient on the contact temperature of polyimide composites: Experimental and finite element simulation Fulltext Access 8 Pages 2012
Enhanced surface segregation of poly(methyl methacrylate) end-capped with 2-perfluorooctylethyl methacrylate by introduction of a second block Fulltext Access 8 Pages 2012
Mitoxantrone-loaded zeolite beta nanoparticles: Preparation, physico-chemical characterization and biological evaluation Fulltext Access 8 Pages 2012
Application of kinetic Monte Carlo method to equilibrium systems: Vapour–liquid equilibria Fulltext Access 8 Pages 2012
Selective adsorption of uranium(VI) from aqueous solutions using the ion-imprinted magnetic chitosan resins Fulltext Access 8 Pages 2012
Competitive adsorption of polymer and surfactant at a liquid droplet interface and its effect on flocculation of emulsion Fulltext Access 8 Pages 2012
Control over the crystal phase, crystallinity, morphology of AgVO3 via protein inducing process Fulltext Access 8 Pages 2012
Stabilization of intrinsic defects at high temperatures in ZnO nanoparticles by Ag modification Fulltext Access 8 Pages 2012
Fabrication and characterization of hierarchical nanostructured smart adhesion surfaces Fulltext Access 8 Pages 2012
Dynamic mechanical analysis and tribological properties of NR vulcanizates with fly ash/precipitated silica hybrid filler Fulltext Access 8 Pages 2012
Photocatalytic decolourisation of Reactive Red 4 dye by an immobilised TiO2/chitosan layer by layer system Fulltext Access 8 Pages 2012
Structural transitions induced by shear flow and temperature variation in a nonionic surfactant/water system Fulltext Access 8 Pages 2012
Sodium caseinate/xanthan gum interactions in aqueous solution: Effect on protein adsorption at the oil–water interface Fulltext Access 8 Pages 2012
Enzymatic synthesis of sugar esters and their potential as surface-active stabilizers of coconut milk emulsions Fulltext Access 8 Pages 2012
Stability and release properties of double emulsions for food applications Fulltext Access 8 Pages 2012
Effect of microwave heating on the low-salt gel from silver carp (Hypophthalmichthys molitrix) surimi Fulltext Access 8 Pages 2012
Fabrication, characterization, and cytotoxicity evaluation of cranberry procyanidins-zein nanoparticles Fulltext Access 8 Pages 2012
Dilute solution and rheological properties of hyperbranched polysaccharide from Pleurotus tuber-regium sclerotia Fulltext Access 8 Pages 2012
Influence of modified starches on properties of gluten-free dough and bread. Part I: Rheological and thermal properties of gluten-free dough Fulltext Access 8 Pages 2012
Functional properties of isolated porcine blood proteins modified by Maillard’s reaction Fulltext Access 8 Pages 2012
Characteristics of SBR, Neoprene and EPDM compounds in a single-pass pendulum scratch Fulltext Access 8 Pages 2012
Effect of temperature and load on three-body abrasion of cermets and steel Fulltext Access 8 Pages 2012
Refined simulation of friction power loss in crank shaft slider bearings considering wear in the mixed lubrication regime Fulltext Access 8 Pages 2012
Numerical simulation of concrete pumping process and investigation of wear mechanism of the piping wall Fulltext Access 8 Pages 2012
A novel approach to measure slip-length of thin lubricant films under high pressures Fulltext Access 8 Pages 2012
Experimental study of real roughness attenuation in rolling/sliding concentrated contacts Fulltext Access 8 Pages 2012
Microwear mechanism of head carbon film during head disk interface sliding contact Fulltext Access 8 Pages 2012
Heat generation modeling of ball bearing based on internal load distribution Fulltext Access 8 Pages 2012
Comparative investigation on the tribological behaviors of CF/PEEK composites under sea water lubrication Fulltext Access 8 Pages 2012
Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations Fulltext Access 8 Pages 2012
Effects of ultrasonic nanocrystalline surface modification on the tribological properties of AZ91D magnesium alloy Fulltext Access 8 Pages 2012
Polyelectrolyte adsorption and layer-by-layer assembly: Electrochemical control Fulltext Access 8 Pages 2012
Experimental comparison of the performance of a journal bearing with a single and a twin axial groove configuration Fulltext Access 8 Pages 2012
Analysis of slider and journal bearing using partially textured slip surface Fulltext Access 8 Pages 2012
Friction in aluminium extrusion-part 2: A review of friction models for aluminium extrusion Fulltext Access 8 Pages 2012
Tribological behaviors of SiC/h-BN composite coating at elevated temperatures Fulltext Access 8 Pages 2012
Study on the friction and wear performance of carbon fabric/phenolic composites under oil lubricated conditions Fulltext Access 8 Pages 2012
Friction and wear properties of Fe7Mo6- and αFeSi2-based alloys in rapeseed oil Fulltext Access 8 Pages 2012
Effect of contact conditions during thermo-mechanical contact between a thermal flying height control slider and a disk asperity Fulltext Access 8 Pages 2012
Wear and corrosion behavior of electrodeposited nickel–carbon nanotube composite coatings on Ti–6Al–4V alloy in Hanks′ solution Fulltext Access 8 Pages 2012
Characterisation of friction and lubrication regimes in premium tubular connections Fulltext Access 8 Pages 2012
Friction properties of acrylic-carboxylated latex films—1: Effects of acrylic acid concentration and pH Fulltext Access 8 Pages 2012