کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10130292 | 1645321 | 2018 | 32 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Chitosan electrospraying: Mapping of process stability and micro and nanoparticle formation
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
علوم زمین و سیارات
علم هواشناسی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Chitosan (CS) micro and nanospheres were produced by a one-step electrospraying process. The influence of several solution and process parameters on droplet morphology, collection yield and process stability was investigated. In addition, the mapping of the process stability was established according to various dimensionless numbers: Reynolds (Re), electric Peclet (Pe), Weber (We), Froude (Fr) and an electrostatic force parameter (Ω). CS (medium molecular weight)/acetic acid (CS/AcOH) solutions at 1 and 2â¯wt/v % CS, and at 70 and 90â¯v/v % AcOH content, allowed the production of micro and nanoparticles. A solution surface tension below 36 mN/m, a relatively low conductivity between 0.015 and 0.089â¯S/m and a shear viscosity between 0.08 and 1.65â¯Paâ¯s, were required for process stability, micro and nanoparticle formation and collection. The optimal process conditions included pumping of CS/AcOH solutions through a 22â¯G needle, at flow rate of 0.2â¯mL/h, a voltage of 33â¯kV and a distance of 11â¯cm from the needle tip to collector plate. In general, the stability in the electrospraying of CS/AcOH solutions required relatively low values for Re, Fr and Ω, but relatively high values for Pe and We numbers.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Aerosol Science - Volume 126, December 2018, Pages 85-98
Journal: Journal of Aerosol Science - Volume 126, December 2018, Pages 85-98
نویسندگان
Nury Ardila, Zineb Ajji, Marie-Claude Heuzey, Abdellah Ajji,