Thermostabilization of Candida antarctica lipase B by double immobilization: Adsorption on a macroporous polyacrylate carrier and R1 silaffin-mediated biosilicification

A large improvement in the thermostability of Candida antarctica lipase B (CALB) was achieved through double immobilization, i.e., physical adsorption and R1 silaffin-mediated biosilicification. The C-terminus of CALB was fused with the R1 silaffin peptide for biosilicification. The CALB-R1 fusion protein was adsorbed onto a macroporous polyacrylate carrier and then subsequently biosilicified with tetramethyl orthosilicate (TMOS). After R1 silaffin-mediated biosilicification, the double-immobilized CALB-R1 exhibited remarkable thermostability. The T5060 of the double-immobilized CALB-R1 increased dramatically from 45 to 72 °C and that was 27, 13.8, 9.8 and 9.9 °C higher than the T5060 values of free CALB-R1, CALB-R1 adsorbed onto a resin, commercial Novozym 435, and Novozym 435 treated with TMOS, respectively. In addition, the time required for the residual activity to be reduced to half (t1/2) of the double immobilized CALB-R1 elevated from 12.2 to 385 min, which is over 30 times longer life time compared free CALB-R1. The optimum pH for biosilicification was determined to be 5.0, and the double-immobilized enzyme showed much better reusability than the physically adsorbed enzyme even after 6 repeated reuses. This R1-mediated biosilicification approach for CALB thermostabilization is a good basis for the thermostabilization of industrial enzymes that are only minimally stabilized by protein engineering.