Modelling of mass loss of char particles during combustion in flow of inert material

The inspiration for this research was an attempt at the numerical simulation of the process of mass loss of char particles during its combustion in the upper zone of a CFB boiler furnace. In the first part of the research an experiment was carried out, during which singular char particles were burned in a flow of heated sand. During the course of this test manually polished spherical particles chosen from arbitrary real coal particles were used whose diameter amounted to 10 mm. The mass loss of burning particles was recorded with a tensometric branch scale. The measuring equipment applied enabled the observation of the mass loss both as a result of combustion and erosion resulting from the contact of inert material accelerated particles with the upper surface of the motionless particle being tested. The results of the experiment were compared with the results of numerical simulation, where for the first time the mass loss of a coal particle was presented as the superposition of two separate processes i.e. combustion and surface erosion. The values obtained indicated a good level of conformity which may illustrate the possibility of applying this model in real conditions.