Evaluation of the weathering performance of basecoat/clearcoat automotive paint systems by electrochemical properties measurements

The aim of the present study was to investigate the possibility of evaluating the weathering performance of a basecoat/clearcoat automotive paint system through the determination of its electrochemical properties. To this end, the electrochemical properties of a basecoat/clearcoat automotive paint in a 3.5% solution of NaCl in deionized water were measured at different weathering exposure times. A constant phase element (CPE) was used for describing the electrochemical behavior of the coatings under test. The values of the CPE parameters, i.e. Y0 (the CPE constant) and n (the CPE power) were subsequently correlated to the extent of photo-oxidation (as measured by appearance, surface roughness, FTIR, surface tension and adhesion measurements) of clearcoat at the surface, in the bulk and at the interface between the basecoat and the clearcoat. The result showed that the electrochemical parameters Y0 and n provide ready means for comparing the weathering performances of basecoat/clearcoat automotive paint systems. Increases in the value of Y0 together with decreases in the value of n with increasing weathering exposure times suggest increased possibilities for the onset of cracking in the clearcoat itself in addition to its propagation towards the basecoat. Additionally, sudden variations in the values of Y0 and n are indicative of increases for the clearcoat to peel off.