Analysis of an energy recovery system for reformate-based PEM fuel cells involving a binary two-phase mixture

A comprehensive analysis on a novel energy recovery system for reformate-based proton exchange membrane (PEM) fuel cell systems is presented. The energy recovery system includes a throttling valve, a heat exchanger, a compressor, and is coupled with a coolant loop for the fuel cell stack. The feed stock of the fuel reformer, which is primarily a mixture of water and fuel, is vaporized in the heat exchanger and is then compressed to a sufficiently high pressure before it is ducted into the fuel reformer. The analysis includes the throttling of two-phase fuel/water mixture and vaporization in the heat exchanger to obtain the temperature and pressure of the mixture at the inlet of the compressor. The results indicate that the power plant efficiency with the energy recovery system can be increased by more than 20% compared to that of a fuel cell power plant without the energy recovery system. Additionally, more than 25% of the waste heat generated by the fuel cell stack can be removed due to the energy recovery system, and the fuel burned for the fuel reforming purpose is reduced by more than 70%.