کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10624694 | 989606 | 2015 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Micro-electrical discharge machining characteristics of newly developed conductive SiC ceramic
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
An electrically conductive SiC ceramic was fabricated via hot-pressing a 72.6 wt% β-SiC, 7.6 wt% polysiloxane, 4.3 wt% phenol resin, and 15.5 wt% yttrium nitrate powder mixture. It was machined into 300-μm-thick cylindrical specimens (YN-SiC) with diameters of 3 mm. The micro-electrical discharge machining characteristics such as the number of shorts, machining time, entrance clearance, material removal rate (MRR), and debris size of the conductive SiC ceramic were compared to those of SUS304. The number of shorts for SiC was smaller than that of SUS304 because of its low electrical conductivity. As the unit discharge energy increased, the debris size and its standard deviation for YN-SiC increased, while those of SUS304 decreased. The machining time for the SiC was longer than that of SUS304 because of the increase in the number of shorts at a small discharge energy. It was also found that the entrance clearance of the SiC was the smallest at a unit discharge energy of about 7 μJ. The MRR was inversely proportional to the machining time.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 41, Issue 3, Part A, April 2015, Pages 3490-3496
Journal: Ceramics International - Volume 41, Issue 3, Part A, April 2015, Pages 3490-3496
نویسندگان
Hyun-Kyu Yoo, Ji-Hye Ko, Kwang-Young Lim, Won Tae Kwon, Young-Wook Kim,