کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10625269 | 989622 | 2014 | 29 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and mechanical properties of plasma sprayed alumina-based coatings
ترجمه فارسی عنوان
ریزساختار و خواص مکانیکی پوشش های بر پایه آلومینا اسپری پلاسما
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
Alumina-based coatings are employed in many industrial applications, in order to protect the surface of metal components against high temperature, wear, corrosion and erosion. In this work two different alumina-based coatings were fabricated by atmospheric plasma spraying (APS), starting from powder particles composed of pure Al2O3 and Al2O3-3 wt% TiO2, respectively. Their phase composition was investigated by X-Ray Diffraction (XRD) and revealed that both the as-sprayed coatings were mainly composed of metastable γ- and α-Al2O3 phases. The γ phase recrystallized to α phase after heat treatment. The porous microstructure was analyzed by Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). Thin TiO2-rich splats were observed within the microstructure of alumina-titania coatings. The pure alumina coatings exhibited similar porosity and higher microhardness than the alumina-titania ones (12.8 against 9.9 GPa). Both the coatings herein analyzed are particularly promising for high-temperature anti-wear applications, because of their enhanced mechanical properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 40, Issue 8, Part B, September 2014, Pages 12861-12867
Journal: Ceramics International - Volume 40, Issue 8, Part B, September 2014, Pages 12861-12867
نویسندگان
G. Di Girolamo, A. Brentari, C. Blasi, E. Serra,