Chemical synthesis of TiO2 nanoparticles and their inclusion in Ni-P electroless coatings

The work addresses the preparation of Ni3P3TiO2 nanocomposite coatings on mild steel substrate by the electroless technique. Nanosized TiO2 particles were first synthesized by the precipitation method and then were codeposited (4 g/l) into the Ni3P matrix using alkaline hypophosphite reduced EL bath. The surface morphology, particle size, elemental composition and phase analysis of as-synthesized TiO2 nanoparticles and the coatings were characterized by field emission scanning electron microscopy (FESEM), energy-dispersive analysis of X-ray (EDAX) and X-ray diffraction (XRD). Coatings with 20 µm thickness were heat treated at 400 °C for 1 h in argon atmosphere. The morphology, microhardness, wear resistance and friction coefficient characteristics (ball on disc) of electroless Ni3P3TiO2 nanocomposite coatings were determined and compared with Ni3P coatings. The results show that as-synthesized TiO2 nanoparticles are spherical in shape with a size of about12 nm. After heat treatment, the microhardness and wear resistance of the coatings are improved significantly. Superior microhardness and wear resistance are observed for Ni3P3TiO2 nanocomposite coatings over Ni3P coatings.