کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10629322 | 991054 | 2016 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Spherical indentation of porous ceramics: Elasticity and hardness
ترجمه فارسی عنوان
انداز کروی سرامیک متخلخل: انعطاف پذیری و سختی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سرامیک متخلخل، انداز کروی، مدل سازی عنصر محدود مدل گورسون، تغییر شکل پلاستیک
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
A combined experimental and numerical approach is used to characterise the elastic and plastic deformation of a porous bulk ceramic material (La0.6Sr0.4Co0.2Fe0.8O3, LSCF) with porosities in the range 5-45Â vol%, undergoing spherical indentation. The Gurson model was used in FEM simulations to describe the densification of the porous material in the plastic zone under the indenter. The simulated indentation response curves, extracted elastic modulus, hardness and densification in the plastic zone all showed good agreement with corresponding experimental observations. The results show that the hardness increases with maximum indentation depth over a representative depth that depends on porosity. In this particular ceramic the hardness, at sufficiently large penetration depth, is approximately 1.7 times the uniaxial yield stress of the porous material.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 36, Issue 6, May 2016, Pages 1435-1445
Journal: Journal of the European Ceramic Society - Volume 36, Issue 6, May 2016, Pages 1435-1445
نویسندگان
Zhangwei Chen, Xin Wang, Alan Atkinson, Nigel Brandon,