Change in flow stress and ductility of δ-phase Pu-Ga alloys due to self-irradiation damage

An internal state variable model for the mechanical behavior of aged Pu-Ga alloys is developed and used to predict the change of the material with accumulated self-irradiation damage or age. The material model incorporates microstructural data such as the primary irradiation-induced defect density from cascades, the density and average size of helium bubbles, the initial dislocation density, and the initial average segment length of the dislocation density as input parameters, and then evaluates the stress-strain response of a representative volume element of the material. Given this response at a single material point, the deformation behavior of tensile specimens is predicted, and it forecasts increased strength, decreased strain hardening, and more strain localization with aging. Although the material point behavior showed some slight strain softening, this strain softening is expected to be masked by statistical variations of different volume elements and by the strain rate sensitivity of the material. Hence, it is not expected to appear in the stress-strain response of macroscopic tensile specimens, and only the increase in flow stress will be measured.