کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10646578 | 1001561 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Anisotropic multiaxial plasticity model for laser powder bed fusion additively manufactured Ti-6Al-4V
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The multiaxial yield and plastic flow behavior of Ti-6Al-4V manufactured in two orientations via laser powder bed fusion (L-PBF) additive manufacturing was investigated. The mechanical properties of L-PBF Ti-6Al-4V were evaluated under uniaxial tension, plane strain tension, pure shear, and combined tension/shear loading. The mechanical behavior was found to be stress state dependent and slightly anisotropic. A plasticity model, consisting of a Hill 1948 anisotropic yield criterion, associated flow rule, and an isotropic hardening law was calibrated and used to describe the yield and plasticity behavior of this material. Validation of the plasticity model under multiaxial stress states demonstrated that the model was able to predict the stress state dependent anisotropic plasticity behavior of this material.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 738, 19 December 2018, Pages 90-97
Journal: Materials Science and Engineering: A - Volume 738, 19 December 2018, Pages 90-97
نویسندگان
Alexander E. Wilson-Heid, Shipin Qin, Allison M. Beese,